View In:
ArcGIS JavaScript
ArcGIS Online for Maryland Map Viewer
Service Description: Conveyance Conveyance features to be identified and inventoried include actual, physical features (pipes and ditches) and database connectivity features (hydraulic connectors). Conveyance is represented as line features in the database. Although they do not physically exist, hydraulic connectors should be inventoried to facilitate connection of drainage systems through stormwater BMPs; this is the only case where a hydraulic connector is created. Not every pipe or ditch conveyance is inventoried, but generally all conveyances between structures are inventoried. Conveyance features will have an upstream and downstream structure. When contract plans are not available showing proper conveyance for a storm drain system, conveyance can be determined by looking at the pipe(s) direction inside of structures. Field crews are not required to open manhole lids, and conveyance can be assumed at the field crew’s discretion when plans are not available.
Pipes, Cross Culverts, & Driveway Culverts
Pipes connect structures together in a system to maintain conveyance. Pipes consist of closed storm drain pipes, cross culverts, and driveway culverts. Rules for collecting cross culvert and driveway culvert pipes are described below. The following are rules that should be followed when collecting pipes within the storm drain network:
All pipes between closed storm drain structures are inventoried.
Pipes less than five feet in height are inventoried within SHA ROW. Pipes that are greater than five feet in height are not inventoried if they do not connect to closed storm drain structures. Pipes that are greater than five feet in height and do connect to closed storm drain structures are inventoried with the storm drain network.
Closed storm drain systems that outfall through a pipe or culvert that is greater than five feet in height are inventoried.
Pipe size, shape, invert, and material are recorded for all pipes. Because field crews are not required to open grates or manhole lids, this attribute information is most often gathered from contract plans. Pipe sizes and material should be verified in the field by observation through inlet grates and at end structures (headwalls, end sections, outfalls, projection pipes). Field crews should become familiar with different pipe sizes and materials prior to conducting field inventory.
Cross Culverts are pipes, boxes, or arches that convey water from one side of the ROW to the other side, usually under the roadway. Cross culverts are inventoried as pipes. Depending on the situation and culvert size, not all cross culverts will be inventoried. The following are rules that should be followed when collecting cross culverts:
The culvert height is determined from contract plans when available. Otherwise care should be taken to measure and estimate the actual culvert height in the field. This may require estimating the depth of sedimentation at the culvert ends to determine the feet of buried culvert. For more information, contact MDOT SHA OIT Enterprise Information Services: Email: GIS@mdot.maryland.gov Last Published: 11/06/2019, Publisher: J.Lloyd (jlloyd@mdot.maryland.gov)
All Layers and Tables Has Versioned Data: true
MaxRecordCount: 1000
Supported Query Formats: JSON
Supports Query Data Elements: true
Layers:
Description: Conveyance
Conveyance features to be identified and inventoried include actual, physical features (pipes and ditches) and database connectivity features (hydraulic connectors). Conveyance is represented as line features in the database. Although they do not physically exist, hydraulic connectors should be inventoried to facilitate connection of drainage systems through stormwater BMPs; this is the only case where a hydraulic connector is created. Not every pipe or ditch conveyance is inventoried, but generally all conveyances between structures are inventoried. Conveyance features will have an upstream and downstream structure. When contract plans are not available showing proper conveyance for a storm drain system, conveyance can be determined by looking at the pipe(s) direction inside of structures. Field crews are not required to open manhole lids, and conveyance can be assumed at the field crew’s discretion when plans are not available.
Pipes, Cross Culverts, & Driveway Culverts
Pipes connect structures together in a system to maintain conveyance. Pipes consist of closed storm drain pipes, cross culverts, and driveway culverts. Rules for collecting cross culvert and driveway culvert pipes are described below. The following are rules that should be followed when collecting pipes within the storm drain network:
All pipes between closed storm drain structures are inventoried.
Pipes less than five feet in height are inventoried within SHA ROW.
Pipes that are greater than five feet in height are not inventoried if they do not connect to closed storm drain structures. Pipes that are greater than five feet in height and do connect to closed storm drain structures are inventoried with the storm drain network.
Closed storm drain systems that outfall through a pipe or culvert that is greater than five feet in height are inventoried.
Pipe size, shape, invert, and material are recorded for all pipes. Because field crews are not required to open grates or manhole lids, this attribute information is most often gathered from contract plans. Pipe sizes and material should be verified in the field by observation through inlet grates and at end structures (headwalls, end sections, outfalls, projection pipes). Field crews should become familiar with different pipe sizes and materials prior to conducting field inventory.
Cross Culverts are pipes, boxes, or arches that convey water from one side of the ROW to the other side, usually under the roadway. Cross culverts are inventoried as pipes. Depending on the situation and culvert size, not all cross culverts will be inventoried. The following are rules that should be followed when collecting cross culverts:
The culvert height is determined from contract plans when available. Otherwise care should be taken to measure and estimate the actual culvert height in the field. This may require estimating the depth of sedimentation at the culvert ends to determine the feet of buried culvert.
Copyright Text: Maryland Department of Transportaion (MDOT), Maryland Department of Transportation State Highway Administration (MDOT SHA), MDOT SHA Office of Environmental Design (OED), MDOT SHA Office of Highway Development (OHD), MDOT SHA Highway Hydraulics Division (HHD), MDOT SHA OIT Enterprise Information Services (GIS@mdot.maryland.gov)
Spatial Reference:
102685
(2248)
Initial Extent:
XMin: 1380039.411296795
YMin: 594628.1678671367
XMax: 1389898.9639154298
YMax: 604501.1714443234
Spatial Reference: 102685
(2248)
Full Extent:
XMin: 617260.9130000031
YMin: 115315.119749993
XMax: 1870071.568
YMax: 753768.456
Spatial Reference: 102685
(2248)
Units: esriFeet
Document Info:
Title: Untitled.aprx
Author:
Comments: Conveyance
Conveyance features to be identified and inventoried include actual, physical features (pipes and ditches) and database connectivity features (hydraulic connectors). Conveyance is represented as line features in the database. Although they do not physically exist, hydraulic connectors should be inventoried to facilitate connection of drainage systems through stormwater BMPs; this is the only case where a hydraulic connector is created. Not every pipe or ditch conveyance is inventoried, but generally all conveyances between structures are inventoried. Conveyance features will have an upstream and downstream structure. When contract plans are not available showing proper conveyance for a storm drain system, conveyance can be determined by looking at the pipe(s) direction inside of structures. Field crews are not required to open manhole lids, and conveyance can be assumed at the field crew’s discretion when plans are not available.
Pipes, Cross Culverts, & Driveway Culverts
Pipes connect structures together in a system to maintain conveyance. Pipes consist of closed storm drain pipes, cross culverts, and driveway culverts. Rules for collecting cross culvert and driveway culvert pipes are described below. The following are rules that should be followed when collecting pipes within the storm drain network:
All pipes between closed storm drain structures are inventoried.
Pipes less than five feet in height are inventoried within SHA ROW.
Pipes that are greater than five feet in height are not inventoried if they do not connect to closed storm drain structures. Pipes that are greater than five feet in height and do connect to closed storm drain structures are inventoried with the storm drain network.
Closed storm drain systems that outfall through a pipe or culvert that is greater than five feet in height are inventoried.
Pipe size, shape, invert, and material are recorded for all pipes. Because field crews are not required to open grates or manhole lids, this attribute information is most often gathered from contract plans. Pipe sizes and material should be verified in the field by observation through inlet grates and at end structures (headwalls, end sections, outfalls, projection pipes). Field crews should become familiar with different pipe sizes and materials prior to conducting field inventory.
Cross Culverts are pipes, boxes, or arches that convey water from one side of the ROW to the other side, usually under the roadway. Cross culverts are inventoried as pipes. Depending on the situation and culvert size, not all cross culverts will be inventoried. The following are rules that should be followed when collecting cross culverts:
The culvert height is determined from contract plans when available. Otherwise care should be taken to measure and estimate the actual culvert height in the field. This may require estimating the depth of sedimentation at the culvert ends to determine the feet of buried culvert.
Subject: A simplified NPDES Conveyance dataset, which represents physical stormwater connectivity features within SHA ROW. Physical stormwater connectivity features include pipes, ditches, and hydraulic connectors. The simplification process flattens databas
Category:
Keywords: NPDES,stormwater structures,headwalls,endwalls,cross culverts,pumping stations,stormwater risers and weirs,inlets,pipe connections,manholes,inflow,outflow,outfall,MDOT,MDOT SHA,OED,OHD
AntialiasingMode: null
TextAntialiasingMode: null
Enable Z Defaults: false
Sync Capabilities:
Supports Registering Existing Data: true
Supports Sync Direction Control: true
Supports PerLayer Sync: false
Supports PerReplica Sync: true
Supports RollbackOnFailure : false
Supports Async: true
Supports ApplyEdits With Global Ids: false
Support True Curves : true
Only Allow TrueCurve Updates By TrueCurveClients : false
Supports Return Service Edits Option : true
Supports Dynamic Layers: false
Child Resources:
Info
Replicas
Query Data Elements
Relationships
Supported Operations:
Query
Query Contingent Values
QueryDomains
Apply Edits
Create Replica
Synchronize Replica
Unregister Replica
Extract Changes